### Steady state response of LCR elements to applied AC voltage

ExpEYES can be used to study the effect of resistive, inductive and
capacitive elements in an AC circuit. L,C and R are connected in series.
The total voltage and the voltage across the resistor are measured as a
function of time. The voltage across LC is obtained by subtracting the
voltage across R from the total. The phase relationships and the vector
diagrams are graphically displayed.

Resistor = 1000 Ohm, Inductor = 300 mH, 5Ohms , Capacitor = 1 uF

Phase shift calculated using the above values is
40.8 deg (calculator on the right bottom side) and the measured Phase
shift is 40.1 deg, well within the tolerance values of the
components.